Eclipse Community
https://board.eclipse.cx/

Need help with installing Windows XP from a USB using Ventoy
https://board.eclipse.cx/viewtopic.php?t=276		 Page 1 of 1
Author:  CalmCreeper360 [ 20 Jun 2021, 10:45 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
So, i tried installing Windows XP from a USB flash drive using Ventoy on my Acer Aspire 7730g.
I used a Windows XP Pro VL ISO with SATA Ahci Drivers slipstreamed into the installation.
For some reason tho it would show me a BSOD during the "Setup is starting Windows" part.
I tried using different ISO's, different USB ports and using different SATA controller modes but the same BSOD persisted.
No other information was given in the BSOD other than the error number but apparently it indicates a inaccessible boot device.

Can anyone give some clues on what i am doing wrong?
Author:  mjdxp [ 20 Jun 2021, 10:58 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
Windows XP hates installing from USB, you're best off getting a USB CD-ROM drive and installing it from CD-ROM. That's how I install XP.
Author:  CalmCreeper360 [ 20 Jun 2021, 11:20 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
mjdxp wrote: *  20 Jun 2021, 10:58
Windows XP hates installing from USB, you're best off getting a USB CD-ROM drive and installing it from CD-ROM. That's how I install XP.
yeah i know but i dont have any CD's at home right now and i dont want to waste a DVD for a 600 MB ISO
Author:  MelonicOverlord [ 20 Jun 2021, 11:44 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
Do you have any CD's / DVDs you can write to? I have a SP3 .iso taken from a legit winxp disk if you want it.

Installing from .iso / usb rarely works on xp unless youre using a VM.
Author:  CalmCreeper360 [ 20 Jun 2021, 12:04 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
MelonicOverlord wrote: *  20 Jun 2021, 11:44
Do you have any CD's / DVDs you can write to? I have a SP3 .iso taken from a legit winxp disk if you want it.

Installing from .iso / usb rarely works on xp unless youre using a VM.
i do have several empty DVD's but i dont feel like wasting 1/4 of the over all storage just for a 600 MB ISO.
Author:  MelonicOverlord [ 20 Jun 2021, 18:41 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
You can clear it after, I beleive
Author:  K4sum1 [ 20 Jun 2021, 21:24 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
Ventoy was a bit buggy for me, wasn't even able to boot a Vista ISO. Easy2Boot doesn't like modded XP ISOs.

Your best bet is WinToFlash. I've used it with success multiple times on my laptop.
MelonicOverlord wrote: *  20 Jun 2021, 18:41
You can clear it after, I beleive
Unless it's a DVD-RW, no.
Author:  CalmCreeper360 [ 21 Jun 2021, 14:29 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
R3n wrote: *  20 Jun 2021, 21:24
Ventoy was a bit buggy for me, wasn't even able to boot a Vista ISO. Easy2Boot doesn't like modded XP ISOs.

Your best bet is WinToFlash. I've used it with success multiple times on my laptop.
MelonicOverlord wrote: *  20 Jun 2021, 18:41
You can clear it after, I beleive
Unless it's a DVD-RW, no.
is is normal for some files not being able to be copied when installing with Win2Flash or Easy2Boot?
Ive had that Problem with every XP iso i have on those programs.

Copying files also takes an eternity and a half
Author:  Moline [ 21 Jun 2021, 17:08 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
mjdxp wrote: *  20 Jun 2021, 10:58
Windows XP hates installing from USB, you're best off getting a USB CD-ROM drive and installing it from CD-ROM. That's how I install XP.
Not in my case. I have an older Acer and Dell, both from 2007 and 2010 respectively, that installed Windows XP just fine from a USB stick, and I just prepared the stick using Rufus. Later hardware will give you troubles, even if you use USB 2.0 (although if you are using SP3, drivers for 2.0 should already be included. Plain RTM (2001) and SP1 (2002) XP may not have them though).
Author:  CalmCreeper360 [ 22 Jun 2021, 17:07 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
UPDATE: After trying other programs i eventually tried winsetupfromusb.
In the first part it refused to copy some files as well but in the second part it just went blank after restarting (just like wintoflash) when starting the system without the usb inserted at boot (but inserted during the Xp boot screen), it would start the second phase but complain about inaccessible files.
Author:  K4sum1 [ 22 Jun 2021, 20:05 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
CalmCreeper360 wrote: *  22 Jun 2021, 17:07
UPDATE: After trying other programs i eventually tried winsetupfromusb.
In the first part it refused to copy some files as well but in the second part it just went blank after restarting (just like wintoflash) when starting the system without the usb inserted at boot (but inserted during the Xp boot screen), it would start the second phase but complain about inaccessible files.
How have you been booting into the second phase of the setup?
Author:  CalmCreeper360 [ 23 Jun 2021, 12:01 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
R3n wrote: *  22 Jun 2021, 20:05
CalmCreeper360 wrote: *  22 Jun 2021, 17:07
UPDATE: After trying other programs i eventually tried winsetupfromusb.
In the first part it refused to copy some files as well but in the second part it just went blank after restarting (just like wintoflash) when starting the system without the usb inserted at boot (but inserted during the Xp boot screen), it would start the second phase but complain about inaccessible files.
How have you been booting into the second phase of the setup?
isnt the second phase supposed to boot from the internal HDD and not the installation media?
Author:  K4sum1 [ 23 Jun 2021, 12:05 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
CalmCreeper360 wrote: *  23 Jun 2021, 12:01
R3n wrote: *  22 Jun 2021, 20:05
CalmCreeper360 wrote: *  22 Jun 2021, 17:07
UPDATE: After trying other programs i eventually tried winsetupfromusb.
In the first part it refused to copy some files as well but in the second part it just went blank after restarting (just like wintoflash) when starting the system without the usb inserted at boot (but inserted during the Xp boot screen), it would start the second phase but complain about inaccessible files.
How have you been booting into the second phase of the setup?
isnt the second phase supposed to boot from the internal HDD and not the installation media?
With modern Windows, yes and normal XP installs, yes, however with XP from USB, you need to boot to the USB and then start the second install phase process from it.
Author:  CalmCreeper360 [ 23 Jun 2021, 12:08 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
R3n wrote: *  23 Jun 2021, 12:05
CalmCreeper360 wrote: *  23 Jun 2021, 12:01
R3n wrote: *  22 Jun 2021, 20:05


How have you been booting into the second phase of the setup?
isnt the second phase supposed to boot from the internal HDD and not the installation media?
With modern Windows, yes and normal XP installs, yes, however with XP from USB, you need to boot to the USB and then start the second install phase process from it.
it would result in a blank screen if i did that
Author:  K4sum1 [ 23 Jun 2021, 14:02 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
CalmCreeper360 wrote: *  23 Jun 2021, 12:08
R3n wrote: *  23 Jun 2021, 12:05
CalmCreeper360 wrote: *  23 Jun 2021, 12:01


isnt the second phase supposed to boot from the internal HDD and not the installation media?
With modern Windows, yes and normal XP installs, yes, however with XP from USB, you need to boot to the USB and then start the second install phase process from it.
it would result in a blank screen if i did that
I don't know, I don't know why this would happen.
Author:  CalmCreeper360 [ 23 Jun 2021, 14:41 ]
Post subject:  Need help with installing Windows XP from a USB using Ventoy
UPDATE: After trying to install Windows XP using rufus i would just get the "Can not find EULA. Setup can not continue Press F3 to quit" error in the first part.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Limited