Eclipse Community :: Troubleshooting issues with Windows 7 Updated (v4)

Eclipse Community https://board.eclipse.cx/

Troubleshooting issues with Windows 7 Updated (v4) https://board.eclipse.cx/viewtopic.php?t=420	Page 1 of 1

Author:	K4sum1 [ 19 Nov 2022, 23:01 ]
Post subject:	Troubleshooting issues with Windows 7 Updated (v4)

If you're having any issues installing the updated Windows 7 ISO, you can try doing the below steps:

Note: If your issues happen after the first stage, check the pointers below the steps.

Step 1: Download this boot.wim replacement

Step 2: Grab NTLite

Step 3: Extract the .7z, install NTLite, and extract the 7 ISO

Step 4: Move the install.esd file from the sources folder in the 7 ISO to the sources folder in the .7z you extracted

Step 5: Use NTLite to convert the install.esd to a install.wim (This will take a while)
(Add, Image Directory, Select the extracted .7z folder, right click install.esd in NTLite, Convert, WIM, (replace source image), Ok)

Step 6: Create the ISO
(Right click the directory under Image history, and select Create ISO)

Step 7: Try the newly made ISO

If you still have issues, here's some pointers

If you get no display or Windows doesn't boot, you might have a UEFI class 3 device, check the guide here

If it hangs at boot, try updating your BIOS.

If you get a 0x0000007E BSOD, try updating your BIOS.

If you get a 0x000000A5 BSOD, you need a patched ACPI.

If you get anything else or the above doesn't work, reply to this post, and I might be able to help.

Author:	binqu [ 11 Jun 2023, 11:26 ]
Post subject:	Troubleshooting issues with Windows 7 Updated (v4)

Yo I got
an B550m Pro 4 From as rock
R5 5500
and I got 0xC000005 after few seconds of install process
I read that's an ram or hd problem, im trying to install on an sata ssd

Author:	K4sum1 [ 11 Jun 2023, 11:43 ]
Post subject:	Troubleshooting issues with Windows 7 Updated (v4)

That sounds like the issue this is trying to fix, I assume you made a .wim. Try following this guide https://www.tenforums.com/tutorials/84331-apply-windows-image-using-dism-instead-clean-install.html

Author:	binqu [ 11 Jun 2023, 16:40 ]
Post subject:	Troubleshooting issues with Windows 7 Updated (v4)

I got Error 13 im DISM when trying to get info

Author:	K4sum1 [ 12 Jun 2023, 01:14 ]
Post subject:	Troubleshooting issues with Windows 7 Updated (v4)

Your ISO might be corrupt, try redownloading it.

Page 1 of 1	All times are UTC
Powered by phpBB® Forum Software © phpBB Limited